LAUNCH X431 X-PROG 3 Key Programming Diagnostic Tool Auto Professional Immobilizer Programmer XPROG For X431 V X431 V+ PAD V PAD

100% Original and High Quality
* LAUNCH is a leading brand in the automotive diagnostic tool industry. We are the official authorized store of LAUNCH, 100% Original and High Quality. The picture below is the authorization letter from LAUNCH to us.

* We have professional technical team, Provding 5 years warranty for this items and lifetime technical service.
LAUNCH X431 X-PROG 3 Vehicle Immobilizer Programmer Key Programmer Tool supports EEPROM Read and Write Key Read and write, support work with X431 V/V+/PAD V, ect
LAUNCH X-PROG 3 advanced immobilizer & key programmer is a powerful chip reading device thatcan read/ write keys to the vehicle. Compatible with X-431 series diagnostic scanners, X-PROG 3 enables Anti-theft type identification, Remote control matching, Key chip reading & matching, anti-theft password reading and anti-theft component replacement.
LAUNCH X431 XPROG 3 Features
1. Compatible with X-431 series diagnostic scanners, X-PROG 3 enables reading/writing EEPROM, on-board MCU and FOR BMW CAS4+/FEM chips, FOR Mercedes-Benz infrared keys, generating special keys, reading FOR BMW engine INS code.

2. Supported brands: For VW, For AUDI, For SKODA, For SEAT, For BMW, For MERCEDES-BENZ, For TOYOTA, etc. More models continue to be updated.

3. Supported systems: Automatic Transmission, Instrument System, CAS, Body System, Lock System, etc.

4. Reads & writes most Engine/Gearbox ECUs without disassembling the shell
LAUNCH X431 X-PROG 3 Core Functions
1. Integrated the functions of key matching/copy, anti-theft IC reading & writing, and ECU reading & writing, etc.

2. Supports common ECU/ MCU/ EEPROM major manufacturers, with over 1200 product models, and constantly updating.

3. Supports ECU replacement for all lost without disassembly for VW/AUDI non-35XX instrument (it can be read directly through independent harness without removing the IC).

4. Supports ECU replacement for the fourth-generation of For VW/AUDI engine;

5. Supports ECU replacement for the fifth-generation of For VW/AUDI Bosch and Siemens engines.

6. Supports the all lost and replacement for the fourth generation of For AUDI EZS, comfortable ECU, and KESSY IC.

7. Supports the For BMW F and G chassis 8HP gearbox ECU reprogramming to empty.

8. Supports the For BMW CAS4/CAS4+ module replacement.

9. Supports the ECU cloning and replacement for BMW Siemens engines.

10. Erase the password for Mercedes-Benz engine and gearbox within 3S.

11. Add the function of calculating the password for the Mercedes-Benz key within 1 minute.
LAUNCH X431 X prog 3 Compatible with (can not work alone)
X431 V, X431 PRO3S+, X431 V+, X-431 PRO GT, X-431 PRO V4.0, X-431 PRO 3 V4.0, X-431 PRO 5, X-431 PAD III V2.0, X-431 PAD V, X-431 PAD VII
LAUNCH X431 X PROG 3 Advantages
1. Supports For VW/AUDI MQB platform engine ECU replacement or cloning (Read engine ECU data directly from the key).

2. Supports For VW/AUDI MQB platform gearbox ECU replacement or cloning.

3. Supports ECU replacement for the fifth-generation of For Audi (0AW/0B5) gearbox.

4. Supports reading, writing & cloning the ECU for the fourth-generation of For VW UDS engine.

5. Supports BMW E chassis 8HP gearbox ECU reprogramming to empty.

6. Works with reprogramming device to backup/restore programming data (For Bosch/Siemens engine ECU).
LAUNCH X431 X prog 3 Supports Car List
For Abarth, For Alfa Romeo, For Aston Martin, For Audi, For Bentley, For Bmw, For BriBmw, For Bugatti, For Chang An, For Chevrolet, For Citroen, For Dacia, For Dallara, For Dodge, For Ferrari, For Fiat, For Ford, For Freightliner, For Geely, For GMC, For Honda, For Hyundai, For Infiniti, For Isuzu, For Jaguar, For Jeep, For JMC, For Kia, For Lamborghini, For Lancia, For Land Rover, For Lincoln, For Mahindra, For Maserati, For McLaren, For Mercedes, For Mini, For Mitsubishi, For Nissan, For Opel, For Peugeot, For Porsche, For Renault, For Saab, For Seat, For Skoda, For Subaru, For Suzuki, For Toyota, For Vauxhall, For Volkswagen (VW), For Volvo, EEPROM
It supports mainstream manufacturers of common ECU MCUs, with more than 1,000 product models and continuous updates
Atmel NSC
Fujitsu Philips
Infineon Renesas M16
MC68HC05 Renesas M32
MC68HC08 Renesas M32R
MC68HC11 Renesas R32C
MC68HC12 Renesas R8C
MediaTek Renesas V850 SPI
MicroChip Renesas V850 UART
Nordic Samsung
ST SiLabs
It supports common mainstream EEPROM manufacturers, with nearly 1,000 product models, and is continuously being updated.
4Wire GI Numonyx SST
Adesto GigaDevice OKI ST
AKM Grundig ONSemi Toshiba
Altera HOLTEK Other Winbond
Amic Hynix PCT Xicor
Atmel I2C Philips xUSSR
BOSCH ITT Pioneer YMC
Catalyst KHIC PMC Spansion
Chingis Macronix Ramtron SPI
Dallas/Maxim MicroChip Rohm NEC
EON Micron Samsung NSC
ESMT MicroWire Seiko Ford
EXEL Mitsubishi Siemens Fujitsu
Fairchild Motorola Sony
Other Features:
1. Compatible with X-431 series diagnostic scanners
X-PROG 3 en1ables reading/writing EEPROM, on-board MCU and BMW CAS4+/FEM chips, Mercedes-Benz infrared keys, generating special keys, reading BMW engine INS code.
2. Supported systems:
Automatic Transmission, Instrument System, CAS, Body System, Lock System, etc.
How to use X-PROG3 to read and write data ?
Method 1:
use main cable to connect car OBD2 16pin interface, and X-PROG3, with LAUNCH X431 Tablet to do key matching, data reading and writing, etc.
Method 2:
Place the anti-theft EEPROM or MCU chip in the chip burning socket, and then insert the chip burning socket into the slot of the anti-theft matching programmer locker and lock it to realize the data interaction between the IC anti-theft chip and the diagnostic host
Method 3:
After removing the ECU from the car, connect the anti-theft ECU pin to the DIY slot of the anti-theft programmer through the cable to realize the data interaction between the anti-theft ECU and the diagnostic host
Specification of LAUNCH X431 X-PROG 3
Input Power: DC12V
Working CurrentMax: 500mA
Power Consumption: 5W
Storage Temperature: -20℃~70℃
Working Temperature: 0℃~50℃
Packing List of LAUNCH X431 X-PROG 3
– Main unit
– Power adaptor
– Main diagnostic cable
– The fourth-generation data acquisition cable
– The fourth-generation of EEPROM data acquisition cable (without dismantling dashboard)
– BENCH mode cable. MCu converter V1. MCU converter V2
– Mcu cable with multiple leads. EEPROM chip adaptor
– Benz infrared analog acquisition key
– MCU cable with multiple leads EEPROM converter
– User Manual
Please note: New and old packaging are shipped randomly, and the accessories of new packaging and old packaging are slightly different.
Item Details
Please Note:
LAUNCH X-PROG 3 has a new look without the LAUNCH logo and OBD1 cable.

Now we send the X-PROG 3 random delivery.